Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

Set Schlitz-Trennbleche BxT 612x612mm FH 300mm 1 Schlitzwand, 2 Trennbleche

Set Schlitz-Trennbleche BxT 612x612mm FH 300mm 1 Schlitzwand, 2 Trennbleche

Set Schlitz-Trennbleche BxT 612x612mm FH 300mm 1 Schlitzwand, 2 Trennbleche
Item no: 1084852 113 

Online price:

Availability on demand

Application
For organising drawer interiors in LISTA 36x36 E drawer tool cabinets.

Execution
  • Slotted walls on both sides: for longitudinal and transverse division of the drawers
  • Slotted grid as for drawer walls in units of 17 mm
  • The lower edge enables the slotted walls to be screwed to the perforated drawer bottom panel
  • Design: sheet steel, including screw-in material
  • Dividers: in combination with the slotted walls, the drawers can be divided into any desired layout
  • The labelling field is offset over the entire width and is used for labelling tabs or barcode carriers
  • The lower edge towards the front enables the separator plates to be screwed to the perforated drawer bottom panel
  • The dimensions are stamped on each divider

Notes
Insert divider sets not including labelling tabs

Brand: LISTA
Number of partition plates: 2
For drawer front height: 300 mm
Colour: Grey
Depth: 612 mm
Height: 275 mm
Number of slotted walls: 1
Type: 1 Schlitzwand 36 E,
2 Trennbleche 18 E
Width: 612 mm
Width x depth: 612 x 612 mm

Manufacturer part no.: 100.357.000

EAN no.: 7612269003161

Versions
loading
Keywords:

You might also be interested in this

  • Set Schlitz-Trennbleche BxT 612x612mm FH 250mm 1 Schlitzwand, 2 Trennbleche
  •
    Waste ashtray collection container 90 litres HxWxD 1060x450x450 mm RAL 7016
  •
    Set Schlitz-Trennbleche BxT 612x612mm FH 150mm 1 Schlitzwand, 2 Trennbleche
  •
    ATORN high-perf. drill, SC TiAlN, HPC 16xD 8.5 mm x 10 mm x 205 mm HA internal
  •
    Skin protection cream Stokoderm® Aqua PURE tube 100 ml
  •
    ATORN HPC reamer, solid carbide TIALN through hole diameter 19.00 mm H7
  •
    ATORN high-perf. drill, SC TiAlN, HPC 20xD 9.5 mm x 10 mm x 290 mm HA internal
  •
    Corundum grinding file, triangular, medium grit, 100x10 mm
  •
    ATORN wire end brush, 22 x 45 x 25 mm, shank 6 mm, stranded wire, 0.20 mm
  •
    ATORN high-perf. drill, SC TiAlN, HPC 30xD 8.5 mm x 10 mm x 350 mm HA internal
  •
    ATORN high-perf. drill, SC TiAlN, HPC 20xD 9.8 mm x 10 mm x 290 mm HA internal
  •
    ATORN high-perf. drill, SC TiAlN, HPC 20xD 8.8 mm x 10 mm x 290 mm HA internal
Herstellerinformationen